Precision Raceworks N54/N55 Ignition Relocation Kit

OPEN BOX PRODUCT. AS IS. NO RETURNS.

The Precision Raceworks BMW N55 HIGH PERFORMANCE IGNITION KIT is designed to integrate with any vehicle equipped with the N55 engine. This is the highest output ignition system ever developed for the N55 community Featuring 100% plug and play connections and low resistance 50ohm/ft proprietary plug wires. This High voltage & High Current coil design is equipped with technology from Marine & Aerospace applications.

While coils do not increase horsepower unless the coil they are replacing are not doing their job the factory coils are lacking in proper output so much that all cars tested (stock or heavily modified) gain 20+ whp and 20+ wtq! Before and after dyno testing can be seen here.

Software tuning of vehicle is NOT required, without software tuning the coil output is xxxMj with software tuning available from most major software and tuning companies the coil output can be increased to 118mJ. To put this in perspective the factory coils have an output of only XXmJ so this kit increases output XXX%!

All components used meet or exceed OEM requirements and feature seals which are both dust and water resistant.

So buy the most robust and highest output coil and stop replacing coils constantly, stop fighting misfires, & enjoy better throttle response, smoother idle, and even more power out of your N55 today!

OEM Manifold Kit - Mounts to the DI fuel rail.  May require removal of the factory airbox, and removal of post on manifold (Cars that have airbox on top of the intake manifold)

Aftermarket Manifold - Intended for use with a Black Market Parts aftermarket intake manifold and mounts to the mounting tabs for the Port Injection fuel rail.

*Aftermarket intake highly recommended and may be required on some applications. Not compatible with OEM airbox (or any airbox that sits on the manifold in the same location as the coils) and may require removal of a mounting peg on the manifold.

**F10 and e9x N55 Chassis cannot fit both ignition kit and aftermarket manifold due to inlet location across the back of the engine.  Please email or call us for additional information before purchasing.

The items installed or applied to vehicles are intended strictly foroff-road use onlyandtrack vehicles. These modifications may not comply with emissions, safety, or environmental regulations required for public road use underEnvironmental Regulatory Agency (ERA)laws. It is the sole responsibility of the vehicle owner or operator to ensure adherence to all applicable local, state, and federal regulations. Use on public roads may result in legal penalties or vehicle impoundment. Always verify compliance with local authorities before installation.

We get a large number of custom orders and requests everyday, so as a result it is not always possible for us to keep every item in stock at all times in our warehouse. If you require the item urgently please contact our sales team here to check the stock before you make your purchase.

If you're unsure whether a part will fit your vehicle, feel free tocontact us herewith your inquiry. Our helpful sales team will reach out to confirm if it's the right match for you.

We offer a flat-rate shipping fee across thecontinental United States. This excludes Alaska, Hawaii, and U.S. territories. For international orders, additional shipping costs will apply. Please contact us for a quote if you are outside the continental U.S.

Also, feel free to also contact us at ColoradoN5X@Gmail.Com for any other questions.

Not all items are covered by warranty. Items including warranty, will clearly state that there is warranty within the product description. Most of these items will be a standard 1-year warranty against manufacture defects. You, the customer, will be responsible for shipping and handling. We will fix/replace that item with a product that is in working condition if you meet the warranty criteria. Please note that you will be allowed ONLY 1 claim within the year for that product. ColoradoN5X is not responsible for any damage caused during the installation of our products.