Bosch 750cc Injectors (Set of 6)

Precision Raceworks supplies these genuine Bosch Motorsport EV14 fuel injectors as flow matched, individually serialized sets of six with the USCAR (EV6) electrical connector. Precision Raceworks matches every set both statically and dynamically within 2% and documents the measured results on a Certificate of Conformance packed with the set, so you know exactly what your injectors flow before they go in the engine.

The compact short body EV14 is a proven Bosch Motorsport injector platform that fits more than 200 applications per Precision Raceworks. For builders stepping up their fueling, that means component level flexibility with documented, closely matched flow across the full set instead of off the shelf injectors of unknown spread.

Important Compatibility Information

• Connector: USCAR (EV6) electrical connector. Confirm your harness or fueling kit uses this interface before ordering.
• Form factor: Compact short body Bosch EV14. Confirm physical fitment for your rail and application. If your build calls for the extended tip version instead, BMP also carries the Precision Raceworks Bosch Motorsport extended tip EV14 injectors.
• Sold as a set of six: Each purchase is one serialized six pack, flow matched as a group.
• Sizing and setup: This is a universal component, not a vehicle specific kit. The right flow rating depends on your power target, fuel, and supporting fuel system. Not sure which rating your build needs? Contact your BMP Tuning rep before ordering.

Why Choose a Flow Matched Set?

Injectors that flow unevenly push individual cylinders rich or lean even when average fuel delivery looks correct. Flow matching keeps all six injectors delivering closely aligned flow, so the set behaves as one consistent unit and your calibration applies evenly across cylinders. Each set is matched within 2% both statically and dynamically, then every injector is serialized so it can be traced to the actual measured flow recorded on the included Certificate of Conformance.

Features

• Genuine Bosch Motorsport EV14 fuel injectors
• Full stainless wetted internals for corrosion resistance and compatibility with all known fuels
• Compact short body design that fits more than 200 applications, per Precision Raceworks
• Strong magnetic valve design for stable operation up to 10 bar, per Precision Raceworks
• Each set matched static and dynamic within 2%
• Certificate of Conformance supplied with each set, proving actual flow data
• Individually serialized injectors that match the flow data on the Certificate of Conformance

Published Flow Data

Precision Raceworks publishes a pressure sweep for the 750cc rating, part number 501-0028:

• Minimum flow of 750cc/min at 3 bar (43.5 psi, the industry standard rating pressure)
• 900cc/min at 4 bar (58.2 psi)
• 1,050cc/min at 5 bar (72.5 psi)

Precision Raceworks does not publish an equivalent sweep for the larger part numbers on this listing. Whichever rating you select, the Certificate of Conformance packed with each set documents the actual measured flow of the specific serialized injectors in the box.

The items installed or applied to vehicles are intended strictly for off-road use only and track vehicles. These modifications may not comply with emissions, safety, or environmental regulations required for public road use under Environmental Regulatory Agency (ERA) laws. It is the sole responsibility of the vehicle owner or operator to ensure adherence to all applicable local, state, and federal regulations. Use on public roads may result in legal penalties or vehicle impoundment. Always verify compliance with local authorities before installation.

We get a large number of custom orders and requests everyday, so as a result it is not always possible for us to keep every item in stock at all times in our warehouse. If you require the item urgently please contact our sales team here to check the stock before you make your purchase.

If you're unsure whether a part will fit your vehicle, feel free to contact us here with your inquiry. Our helpful sales team will reach out to confirm if it's the right match for you.

We offer a flat-rate shipping fee across the continental United States. This excludes Alaska, Hawaii, and U.S. territories. For international orders, additional shipping costs will apply. Please contact us for a quote if you are outside the continental U.S.

Also, feel free to also contact us at ColoradoN5X@Gmail.Com for any other questions.

Not all items are covered by warranty. Items including warranty, will clearly state that there is warranty within the product description. Most of these items will be a standard 1-year warranty against manufacture defects. You, the customer, will be responsible for shipping and handling. We will fix/replace that item with a product that is in working condition if you meet the warranty criteria. Please note that you will be allowed ONLY 1 claim within the year for that product. ColoradoN5X is not responsible for any damage caused during the installation of our products.